poly tanks, plastic water tanks, plastic water tank, polyethylene tanks, rototank
Search
Close this search box.

Rainwater Harvesting 1400L Tank

Highest Grade Water Tank
Gutter Buddy
First flush Kit (pipes Included)
PVC Solvent
40/20 reducing Bush
Plastic tap
Plumbers Tape
Complete Rainwater Harvesting System
Does Not Include Installation

R4815,00

Description

Specifications on Rainwater Harvesting Kit

Gutter Buddy:              Assists in Reducing large leaves and debris from entering your water tank.

First flush Kit:             Contains all components to assemble a first flush tank.

Collects smaller particles from water runoff, stores and allows you to attach a Hose pipe to release the wastewater.

Contained in Kit:

1 x 80/110mm intake cap

1 x Float Ball

2 x 110mm holder bat

1 x 80mm Round T piece

1 x 110mm base cape

1 x ball valve

1 x Solvent Glue

1 x 650mm x 110mm pipe

1 x 400mm x 80mm pipe

Description

The First Flush rainwater filter system will divert any small or dissolved pollutants from your roof and gutters into a separate pipe chamber, so it does not enter the tank.

It also stops sediment building up in the bottom of your tank.

When it first starts to rain, water slowly builds up in the roof gutter system before it exits through the downpipe. The first flush of water from the roof can contain amounts of bacteria from decomposed insects, lizards, bird, and animal droppings and concentrated tannic acid. It may also contain sediments, water borne heavy metals and chemical residues, all of which are undesirable elements to have in a water storage system.

Gutter mesh and baskets (leaf catchers) will help with leaves and larger debris but can’t stop small bits like dust and bacteria. That is why it is recommended that you install a First Flush Diverter.

We all know that prevention is better than cure and so it makes sense to stop the pollutants from entering your tank.

How it works:

The first flush device is installed along the gutter down pipe that will feed into your water tank. As the water level in the first flush diverter chamber (110mm pipe) rises, the ball floats and rises. Once the chamber is full, the ball rests on a seat inside the chamber preventing any further water entering the diverter. The subsequent flow of clean water is then automatically directed along the pipe system through the T piece into the rainwater tank.

 

It is best to have one first flush diverter on each downpipe. However, a single unit can be placed close to the tank and perform a first flush for several downpipes. This will really depend on how big your roof catchment is and how clean you need the water to be.

The amount of water you need to first flush will depend on a few things like:

The first flush system is a simple and effective device. After the rain, just drain the system through the valve, ready for the next rain. The bottom of the unit (end cap) can be screwed off to fully clean the unit occasionally. During periods of frequent rain, it may not be necessary to drain the first flush device every time it starts raining as the roof and gutters may already be clean.

First flush systems work best when a leaf catcher box is installed at the start of the down pipe. The leaf catcher box is fitted at the start of the downpipe either directly on the underside of the roof gutter at the facia board, or to the wall. The device deflects leaves and debris away from the flow of rainwater.

A diagram of the installation is printed on the box.

INSTRUCTIONS FOR INSTALLING THE FIRST FLUSH DEVICE:

You will need to secure the First Flush and pipes to a wall or other structure. This should only be done after you have assembled the first flush kit in full as follows:

1) Supplied -650mm x 110mm PVC pipe to use as the chamber pipe. The length you require should leave enough area at the bottom of the device to the ground as space is required for the end cap to be screwed off for occasional cleaning.

2) Attach the bottom end base cap assembly to the 110mm pipe you have cut using PVC plumbing glue or a good plumbing silicone.

HINT: Only screw the valve into to the end base cap once the installation is complete. This will minimize the chance of snapping the valve off in the end cap housing if you drop the pipe while installing!

3) Insert the ball into the chamber.

4) Insert the top end cap onto the 110mm pipe and secure using PVC glue. (The top cap has a belled 80mm inlet).

5) Once the unit is assembled and the PVC glue is dry, remove or cut the existing downpipe at the required height.

6) To affix the first flush unit to the wall, 2 x 110mm mounting bracket is included in the DIY kit. (If more mounting brackets are required to secure the unit, they can be bought at your local branch)

7) Supplied 400mm of 80mm pipe, can be inserted into the T- piece and the base section, you can know attach to the correct position on the wall.

8) Place the gutter buddy in position screw into the wall, then attach your first flush system below.

9) The T piece supplied should still follow a fall to the tank.

If you require additional advice our teams are available to assist.

Features of Tank

Manufactured with the best food grade
LLDPE Virgin Plastic
UV Resistant and BPA -Free
Food grade inner black liner
Sturdy ribs for added strength & durability
Suitable for domestic and commercial use
Agricultural approved for use with livestock
Black Inner liner – Prevents Algae growth
Agreement Approved
Registered with Armsa, Master Builders & Plastic Convertors Association
Heavy weights of the industry
Child Safety Lids Standard
Strong sealed tank connectors as standard

Safety of Tank

All tanks should be installed as per our recommendations
Check your area for installation – that you have sufficient height and diameter
Tank stands are available at an extra cost
Tanks should be secured in place once full
Suitable for above ground level only
Tanks designed for stationary purpose only
Trained technicians for back up service and advice available

Excludes Installation

Colour Variants

Actual colours may vary. We do our best to ensure that our photos are as true to colour as possible. However, due to photographic lighting sources, inconsistencies of various monitors settings, we cannot guarantee that the colour you see accurately portrays the true colour of the product.

Read More First Flush
× Get a Quote